Where powerful illumination and rugged speed measuring accuracy is required for the textile industry, the DT-311J will perform where other stroboscopes will not. The DT-311J is used to set injection timing, injection pressure, the timing of shedding and weft running time of weaving machinery. Units combine rugged NEMA 4X (IP65) housing with high-performance accuracy, special phase shifting, with shock-absorbing components and top-mounted handle, allows the equipment operator maximum flexibility when setting the timing of weaving machinery.
- LIMTED RANGE: 200-1,500 RPM/FPM
- Accepts external trigger input and provides synchronizing pulse output
- Water & Dustproof housing (IP65)
- Phase shift for best view and flash photography
- Hand-held or tripod operation
- Easy-to-operate controls
- Easy-to-read LED display
| Flash Range | 200-1,500 FPM |
| Internal Signal Range | 200 to 1,500 FPM |
| Phase Shift | 0° – 359° / 1° increments |
| Accuracy | ±1 digit |
| Flash Rate/Phase Angle Setter | Rotary dial |
| Display | 4 digit, 10mm high Red LED |
| Divide Ratio | 1/1, 1/2, 1/3, 1/4, 2/4 with shift |
| Input Signal | High level: 5-24 V pulse Low Level: 0-1 V pulse. 2 msec minimum. Impedance less than 10k Ω |
| Input Impedance | 47k |
| Display Mode | Phase shift (degree), Tachometer |
| Flashtube | Xenon lamp, max 10 W at 1,5000 rpm |
| Flashtube Life | 1,200 hours at 1,500 rpm |
| Power Requirements | 115 V or 230 V AC (specify), 50/60 Hz, 30 VA |
| Power Consumption | 20VA max |
| Operating Temp | 32 to 104 °F (0 to 40 °C) |
| Dimensions | 149w x 174h x 214d mm |
| Weight | 4.2 lb (1.9 Kg) |
| Warranty | 2 years |
| Included Accessories | 19.68’ (6m) input/power cable with connector, rubber strobe guard with handle |
Reviews
There are no reviews yet.