The built-in datalogger has a capacity of 10,000 data values stored in up to 40 batches with 250 values/batch which is transferred via the USB port using the supplied cable. The TI-007DLX does not require any software, it will be shown as a drive when connected to a PC allowing convenient drag-n-drop into your program of choice. Data is saved in a comma deliminated file format (.csv) which makes it compatible with all programs and software.
The TI-007DLX has measuring range in steel from 0.0060 to 1.0000 inch, (0.15 to 25.40 mm). Using a single element delay tip transducer, the gauges will measure thin materials and automatically remove any coatings in Echo-Echo Mode (E-E) as well as automatically switch to Interface Echo Mode (I-E)when measuring thicker materials, For measurement of plastics, the user would select Plastic Mode (PLAS) and use the option Graphite Delay Line Tip (p/n X-633-0000).
Additional Measuring Modes include Differential (DIFF) where a user sets a “nominal value” and the gauge displays the ± difference between then nominal and actual wall thickness, Alarm (user-set Hi/Low Limits) trigger Hi/Lo LED’s when the measured values are out of tolerance and Velocity Mode
The TI-007DLX can also be used with single element contact transducers for wall thickness measurements up to 36 inches (923 mm).
Features
- Includes NIST Traceable Calibration Certificate
- Large, backlit LCD display retains last reading
- Resolution of 0.0001 inch (0.001 mm) with Selectable units of inch or mm
- Built-in datalogging for 10,000 data values stored in up to 40 batches with 250 values/batch with USB Output
- Scan mode, 100 readings/sec. Probe is slid over a large measuring area, the minimum thickness during the “scan” will be displayed
- Adjustable GAIN (AGC) in 5 steps to fine tune the gauge for use on challenging materials or applications
- Can be used with both Single Element Delay Line and contact transducers (5 to 20MHz)
- LCD shows Thickness Value, Velocity Setting, Gain Setting, Stability & Battery Indicators, Scan Mode, Zero and units
- Operates on two (2) AA Batteries – 45 hours continuous operation
- Calibrate to a sample of known thickness which automatically calculates the optimal acoustic velocity
- Powered by: 120MHz FPGA timing & 100 volt spike pulser
- Measure Modes: Pulse-Echo (P-E), Echo-Echo (E-E), Interface Echo (I-E) and Plastics (PLAS)
- Additional Modes Include Differential (from user-entered “nominal value”), Alarm (user-set Hi/Low Limits) and Velocity Mode
- Optional serial RS-232 or Bluetooth output
- IP 65 Rated for protection even in the toughest field conditions
- CE-Certified
- Warranty: Gauge: 5 Years Probes: 90 Days
- Made in USA
Complete Kit
Delay Line Tips for TI-007DLX
| P/N | Description | Standard / Optional | Image |
| F-000-7102 | 1/4″ x 3/8″ for all metals (Short) |
Standard |  |
| F-000-7103 | 1/4″ x 1/2″ for all metals (Long) |
Standard |  |
| X-633-0000 | 1/4″ x 3/8″ Graphite Tip for thin plastics (Graphite Short) |
OPTIONAL |  |
Reviews
There are no reviews yet.