The rugged coating thickness gauge MiniTest 650 follows its long-time proven predecessor model MiniTest 600 in the line of gauges with a fixed external probe offering measurement of all non-magnetic coatings on steel and all insulating coatings on non-ferrous metals. It is specially designed to work in rough environments and on abrasive surfaces, e.g. shot-blasted steel, and plasma spray-coated surfaces.
The MiniTest 650 is the ideal tool for any measuring task in the finishing industry. The rugged and easy-to-handle thickness gauge combines extended mechanical life on the one hand and high accuracy on the other hand to meet the requirements of any professional user in the shipbuilding, automotive, bridge building, construction or other industry.
The battery-operated gauge features a backlit display and a one-meter sensor cable. The newly developed one-pole sensor is made of a wear and tear-resistant carbide material to ensure a virtually unlimited life cycle under normal use. Optimal ram and impact protection is provided through the rubber-rimmed casing. Via a USB interface, the MiniTest 650 can be connected to a PC for online measurements or the display of statistics.
Features
- Resolution of 0.01 mils (1 micron)
- Impact-protected housing for use in tough environments
- Probe with wear-resistant carbide metal tip
- Automatic identification of the substrate material
- High repeatability
- For fast and precise measurements of non-magnetic coatings on steel and insulating coatings on non-ferrous metals
- External sensor
- USB-interface to transfer on-line measurements or statistics to a PC
- Statistical evaluation of readings (mean value, standard deviation, number of readings, minimum and maximum)
- Coating thickness measurement up to 2 or 3 mm
- Data transfer program Msoft7000 basic edition
- DIN EN ISO 1461, 2178, 2360, 2808, 3882, ASTM B 244, B 499, D7091, E 376
- Made in Germany
- Includes Factory Calibration Certificate
- MiniTest 650 with probe
- Control standard(s) (bare metal plate)
- Calibration standard(s) Calibration foils/shims
- Operating instructions
- Factory Calibration Certificate (without data)
- Soft pouch
- Data transfer program Msoft7000 basic edition
- 3x AAA Batteries
How to change measuring units – Microns to Mils
2. Hold ZERO then turn it on, release ZERO. Display should show 1.0
3. Press ZERO until it shows 4.0
4. Press UP arrow and it will show 4.1
5. Turn Off
6. Turn On4.0 = microns
4.1 = mils
| Measuring Range | Model F (steel) 0 – 3000 μm / 120 mils Model N (non-ferrous metal 0 – 2000 μm / 80 mils Model FN (dual sensor) 0 – 2000 μm / 80 mils |
| Measuring Uncertainty | ± (2 % of reading + 2 μm) / ± (2 % of reading + 0.08 mils) |
| Resolution (mils) | 0.01 mils (up to 9.99 mils) / 0.1 mils (over 10.0 mils) |
| Resolution (microns) | 1 micron |
| Minimum curvature radius convex | 5 mm / 0.2“ |
| Minimum curvature radius concave | 25 mm / 1“ |
| Minimum measuring area | Ø 20 mm / 0.8“ |
| Minimum base thickness: | 0.5 mm / 20 mils (F) / 50 μm / 2 mils (N) |
| Display | 4-digit screen data (11 mm) |
| Measuring units | μm – mils user selectable |
| Calibration | Standard, 1-point and 2-point calibration |
| Statistics | Calculated from maximum 9,999 readings, mean value, standard deviation, number of readings, minimum and maximum |
| Interface | USB |
| Power supply | 3 Micro AAA batteries (for more than 10,000 readings) |
| Dimensions and weight | Housing: 70 mm x 122 mm x 32 mm / 2.7” x 4.8” x 1.26” Sensor: Ø 15 mm x 62 mm / Ø 0.60” x 2.44”; 225 grams / 7.93 ozs |
| Ambient temperature | Gauge: 0 to 50 °C / 32 ° to 122 °F Sensor: -10 ° to 70 °C / 14 ° to 158 °F |
| Warranty | 1 Year |
Reviews
There are no reviews yet.