The new Check-Line DTL Digital Torque Wrench is designed for precise measurement and application of torque in industrial, automotive, aerospace and many other applications. Its small size and ratcheting head are ideal for use in areas with limited access. It measures and applies torque in both CW and CCW directions and displays in Real-Time or Peak Mode. Measurement units are user selectable (Lb-in, N-m, ft-lb or Kg-cm).
The DTL features a programmable target set point that indicates the desired torque value with a red and green LEDs and audible beep.
- Displays in-lb, N-m, Kg-cm and ft-lb units (User selectable)
- CW and CCW operation
- Peak or Real-Time (track) mode (User Selectable)
- Programmable Target Set-point with audible and LED indicators
At 90% of Target, Green LED illuminates with slow audible beep
At 100% of Target, Green & Red LEDs illuminate with continuous beep - 1/4″ Square Drive
- Ratcheting Head
- Includes Calibration Certificate (Click for sample)
- CE Certified
| Model | Measuring Range | Resolution |
|---|---|---|
| DTL-50i | 2.6 – 53.1 Lb-in 0.3 – 6.00 Nm 0.22 – 4.4 Lb-ft 3. – 61 Kg-cm |
0.01 Lb-in 0.001 Lb-ft 0.001 Nm 0.01 Kg-cm |
| DTL-100i | 5.3 – 106.2 Lb-in 0.6 – 12.00 Nm 0.44 – 8.85 Lb-ft 6.1 – 122.4 Kg-cm |
0.1 Lb-in 0.01 Lb-ft 0.01 Nm 0.1 Kg-cm |
| DTL-175i | 8.8 – 177.0 Lb-in 1.0 – 20.00 Nm 0.74 – 14.75 Lb-ft 10.2 – 204.1 Kg-cm |
0.1 Lb-in 0.01 Lb-ft 0.01 Nm 0.1 Kg-cm |
Complete Kit
The DTL is supplied as a complete kit including the wrench, 1 AAA battery, instruction manual and calibration cert in a fitted plastic carrying case.
Dimensions in MM
| Accuracy | CW ±2% / CCW ±3% of indicated from 20 – 100% of capacity |
| Operation Mode | Peak hold/ Track |
| Unit Selection | ft-lb, in-lb, N-m, Kg-cm |
| Dimensions | Length: 8.25″ x 1″ (210 x 25.4mm) |
| Head Dimensions | Width: 0.75 / 19.2mm at (widest location) Height: 0.4″ / 10.2mm (not including length of 1/4″ drive which extends 0.31″ / 8mm) |
| Head Type | Lever type Ratchet |
| Battery | 1 AAA |
| Battery Life | 12 Continuous Hours 1 Year Standby |
| Model Code in Manual | DME2-006CN, DME2-012CN |
| Operating Temperature | -10°C ~ 60°C |
| Zero Function | To zero the DTL-100i press the “C” key. The display will clear then it will return to the “target value” (preset) |
| Storage Temperature | -20°C ~ 70°C |
| Humidity | Up to 90% non-condensing |
| Warranty | 1 Year |
Reviews
There are no reviews yet.